tel: 01922 710499

fax: 01922 401937

Midland Rapid Reinforcements

steel reinforcement …when you need it!

Slab Products

expanded foam

expanded foam
£ per linear metre
Code
Depth
10 mm
12 mm
15 mm
20 mm
FL100
100 mm
0.66
0.820
1.02
1.20

FL125
125 mm
0.84
0.98
1.24
1.40

FL150
150 mm
0.95
1.13
1.42
1.70

FL175
175 mm
1.09
1.28
1.60
2.09

FL200
200 mm
1.23
1.50
1.86
2.39

FL225
225 mm
1.51
1.80
2.24
2.65

FL250
250 mm
1.66
1.96
2.40
2.90

A heavy duty spacer for supporting mesh reinforcement in ground floor slabs. Ideal for use on polythene membranes, sand or hardcore.

cold poured sealant

cold poured sealant
Code
Pack size
£ per pack

CPS4.5
4.5 litres
34.30

Primer
1 litre
15.20

A two component polyurethane sealant. Excellent adhesion and resistant to a wide range of chemicals. For internal and external joint sealing.

concrete screedrail

screedrail
Code
Depth
Length
£ per rail
FR100
100 mm
3 m
17.25
FR125
125 mm
3 mm
17.80
FR150
150 mm
3 mm
18.50
The most up to date and economical method of slab construction available to the contractor.

The need to hire costly roadforms is eliminated by simply screeding off the rails provided which are left permanently in position, bringing further savings in the labour costs normally associated with roadform removal.

Adjacent bay construction also becomes increasingly quicker. Screedrail is manufactured in reinforced concrete with a material strength of 50 N/mm2.

It comes in a range of heights to suit any thickness of slab under construction.

The adopted profile allows for maximum bond between adjacent bays with holes provided for the insertion of dowel bars.

dual seal bentonite water-stop

bentonite
Code
Pack size
£ per pack
DSWS
7 mm x 25 mm x 8  m  rolls
48.00
Dual seal water-stop is a bentonite based water-stop which reacts in contact with water by swelling to form a watertight seal in concrete sdivuctures.

It has been specifically designed to seal construction joints against the ingress or egress of liquids in water retaining or excluding structures.

Dual seal water-stop is fixed by nailing to the face of the existing pour prior to placing the next pour. It is installed directly on to scabbled surfaces and end joints are simply achieved by overlapping, no welding or adhesives are required.

Can be applied to green concrete and in damp conditions.

polythene

spacers
Code
Thickness
Roll size
£ per roll
PF500
125 Mµ
4 x 50 m
26.80
PF1000
250 Mµ
4 x 25 m
29.50
PF1200
300 Mµ
4 x 25 m
33.50
PF2000
500 Mµ
4 x 12.5 m
36.50
TPS
Temporary protection
4 x 50 m
24.75
Supplied in either blue or black. Please state when ordering.

expansion dowel bar sleeves

sleeves
Code
Diameter x Length
Pack
£ per pack
12DBS450
12 x 450 mm
100
42.31
16DBS200
16 x 200 mm
100
30.22
16DBS300
20 x 300 mm
100
31.80
20DBS300
25 x 300 mm
100
42.31
25DBS300
25 x 300 mm
100
32.21
Manufactured from a flexible PVC tube with a compressible foam plug inserted in one end to allow expansion. Square section also available to order.

debonding compound

debonding compound
Code
Pack
£ per pack
DB05
5 litres
15.00
DB25
25 litres
15.00
This brush or dip applied one part bitumen based compound is designed for coating dowel bars in expansion joints, where a controlled amount of movement is required.

Coverage 1.8 – 3.6 m2 per litre.

two part crack inducer

two part crack inducer
Code
Width x depth
Pack
£ per pack
2CI50
10 x 50 mm
5 m
6.89
2CI75
10 x 75 mm
5 m
9.98
This product must have the top section removed after the concrete has cured, leaving a sealant void of 25mm deep x 10mm wide.
The two part crack inducer should be between 1/4 and 1/3 depth of slab.